Co Print Quadro introduces a four-toolhead linear rail for multi-material 3D printing
The hardware architecture moves four independent extruders along a single track to cut color change times to one second.

Co Print launched the Quadro, a multi-material 3D printer built around an Independent Quad Extruder mechanism that shares a single linear rail. The hardware design aims to eliminate nozzle purging by assigning each filament spool its own dedicated hotend and stepper motor.
Four independent extruders on one track
Hardware startup Co Print developed an extrusion architecture dubbed IQEX, short for Independent Quad Extruder, an innovation designed to solve filament waste in multi-color 3D printing. Instead of feeding multiple strands through a single nozzle or using mechanical pick-and-place grippers, the Yanko Design report shows that the system mounts four separate toolheads on one 12mm linear rail. Each toolhead operates with its own stepper motor, driving belt, and dedicated hotend, allowing different materials to run simultaneously at distinct extrusion temperatures without thermal compromise.
Docking mechanics and filament waste reduction
Because four print heads cannot bypass one another on the same axis, parking stations named QDock Stations sit at both ends of the gantry. When a color change occurs, the active head slides directly into an open dock while the incoming unit moves out to resume printing. Co Print recorded a handoff from Tool 1 to Tool 2 in 1.00 seconds, while switching to Tool 3 and Tool 4 took 1.40 and 1.57 seconds. Single-nozzle systems typically require around 60 seconds to purge old plastic, whereas this invention reduces purge waste by up to 90%.
Inside the dock, idle nozzles cool to 140°C to limit oozing, and mechanical seals cover the tips to stop stray material from dropping onto the print bed. The machine begins heating a parked head back to extrusion temperature roughly 30 seconds before its turn, readying the filament for immediate deposition.
Chassis structure and automated calibration
The machine uses a bed-slinger layout built with thick aluminum sections and metal-to-metal joints, with roughly 70% of the structure fabricated from metal. Two synchronized motors drive the Y-axis carriage across industrial linear rails to prevent bed twisting during acceleration, supporting travel speeds of up to 600 mm/s and acceleration of 10,000 mm/s². The printable volume provides a 300 mm cube across all four toolheads.
To align four separate tips without manual adjustment, an integrated routine called 360° Toolhead Calibration measures each nozzle against a physical reference pin located at the back-right corner of the print bed. In addition, integrated load cells inside each toolhead conduct an automatic flow rate calibration, measuring nozzle pressure before each job.
Read also on The Patent: Graphene energy harvester powers wireless sensors from magnetic field leaks · Diden Spider Climbs Shipyard Steel Walls to Weld Overhead



